Honeywell FS10 flame detector

1.General Introduction

Honeywell FS10 flame detector is based on high-speed microprocessor detection and process control system specially designed for liquid and powder coating applications, quickly detects the presence of a flame, reacts by initiating a shutdown of the electrostatic finishing process in a matter of milliseconds; and effectively interrupts the fire before residues and wet paint films can ignite. FS10 flame detector is the only system that provides a two-stage response: an ALERT for spray gun "fireball" type fires and if the fire continues, a FIRE ALARM is declared in 4-5 seconds. FS10 flame detector is vastly superior to conventional detectors due to the electro-optical quantum infrared sensors array and the ability to accurately detect fires without false alarms. The FS System 10 is available in both wall-mount controller and card controller configurations.(For additional information on card controller, consult the factory.) The detector is mounted in an explosion-proof housing. The wall-mounted controller is a self-contained system mounted in a NEMA 12 enclosure with LCD display and LED status lights. Three 10-amp mechanical relays have been incorporated for shutting down the paint flow, electrostatics and conveyor. Event history and fire tech data are reported by the detector in real time and data, then stored in the controller’s non-volatile memory. FirePic™ and SnapShot™ data can be downloaded from the RS-232 port of the controller from your PC. The controller may operate with one or two detectors.

2.General Specifications

Items	Description
Sensitivity	45 ft. and 30 ft. to a 1 sq. ft. gasoline fire
Response time	Alert: 0.3 second (response to “fireball” type fires) Fire Early Warning: 1 second (early response to a fire alarm) Fire Alarm: Less than 5 seconds (if fire continues
Field of view	90° (± 45° horizontal and vertical)
Spectral sensitivity	Visible: 400 – 700 nanometers Near Band IR: 0.7 – 1.1 microns Wide Band IR: 0.7 – 3.5 microns
Operating voltage	24 VDC nominal (18-32 VDC) - Regulated
Power consumption	Normal: 85mA (typical); Alarm: 120mA (typical)
Output relays	Alert/Early Warning: SPST, N.O. Fire Alarm: SPST, N.O. Fault: SPST, N.O. with no power Contact ratings: 1 amp @ 24 VDC
Normal Operation	Fault relay is Energized, Non-Latching All other relays are De-energized Fire and Alert relays are available Latching or Non-Latching
Operating Temperature	Operating: -40º to +185ºF (-40º to +85ºC)
Humidity Range	10% to 90% relative humidity, non-condensing
Weight	Aluminum: 3.8 lbs (1.7 kg)
Enclosure	Copper-Free Powder Coated Aluminum or optional 316 Stainless Steel; NEMA 3, 4 and 4X
Conduit Entries	Two ¾” NPT
Certifications	FM, CE
Dimensions	4.81 in. diameter; 4.65 in. deep
Mounting	Swivel bracket assembly - optional
Warranty	Two years from date of shipping

3.Quick Reference Chart

		FS24X-2	FS24X-9	FS20X	FS10
SPECTRALSENSITIVITY	Ultraviolet Band (0.18 - 0.26 μ)			√
	Visible Band (0.4 - 0.7 μ)	√	√	√	√
	Near Band IR (0.7 μ – 1.1 μ)	√	√	√	√
	Wide Band IR1 (1.1 – 3 μ)	√	√	√	√
	Wide Band IR1 (1.1 – 3.5 μ)			√
	Wide Band IR2 (3.0 – 5.0 μ)	√	√
SENSITIVITY(feet)	Very High	200+	200+	200+	60
	High	150	150	150	45
	Medium	100	100	100	30
	Low	50	50	50	15
RESPONSE	Fireball / Quick Response Option (< 500 mS)				√
RESPONSE	Acetylene Long Range Option			√
OTHER	Field of View (conical)	110°	90°	90°	90°
	HART Option	√	√	√
	Modbus Built-In	√	√	√
ENCLOSURES	Aluminum Class I, Div._1	√	√	√	√
ENCLOSURES	316 Stainless Steel Class I, Div._1	√	√	√	√
APPROVALS	FM	√	√	√	√
	cFM	√	√	√	√
	ATEX	√	√	√	√
	IECEx	√	√	√	√
	INMETRO	√	√	√
	GOST-R	√	√	√
	SIL 2 Compliant	√	√
TEST LAMPS/SOURCE	TL-2055	√	√	√
	TL-1055	√	√	√
	FS-846-B				√
MOUNT	SM4 bracket	√	√	√	√

4.Order Code Selection

Part No.	Description
Card Controller with FS10 Electro-Optical Fire Detector
Option-2FL	2FL system: liquid paint spray line applications with two (2) fire signal relay levels
Option-2GF	2GF system: general finishing applications with process control and fire alarm signal relays
Option-2WE	2WE system: powder coating and paint spray line applications with two (2) fire signal relay levels
Option-2WL	2WL system: paint spray line applications with three (3) fire signal relay levels
Option-2GE	2GE system: powder coating and paint spray line applications with two (2) fire signal relay levels
BP-1	Backplane for 1 card controller
BP-2	Backplane for 2 card controllers
BP-4-L9	Backplane for 4 card controllers
Spare Parts - FS10 Wall Mount Controller and Card Controller
SW-5143-001	Replacement keypad for FS10 wall mount
FS10-CARD-2FL	Liquid paint spray line applications with two (2) fire signal relay levels
FS10-CARD-2GE	Powder coating and paint spray line applications with two (2) fire signal relay levels
FS10-CARD-2GF	General finishing applications with process control and fire alarm signal relays
FS10-CARD-2WL	Paint spray line applications with three (3) fire signal relay levels
FS10-Detector	Model FS10 fire Detector for use with wall mount controller or card controller
FS10-DET-MODULE	Replacement electronics module for fire detector for the above systems
Detector Cables
CAB-50	50ft. card controller cable. Connects fire detector to controller
CAB-100	100ft. card controller cable. Connects fire detector to controller
FS10 Stand Alone (Unitized) Electro-Optical Fire Detectors
FS10-R30	Copper-free aluminum housing including ALERT / FIRE EARLY WARNING relay, 30ft. sensitivity (latching alert and alarm relays)
FS10-R30-SS	316 stainless steel housing including ALERT / FIRE EARLY WARNING relay, 30ft. sensitivity (latching alert and alarm relays)
FS10-R30-EC	Copper-free aluminum housing including ALERT / FIRE EARLY WARNING relay, 30ft. sensitivity (latching alert and alarm relays), Normally Energized with Normally Closed Contacts
FS10-R45	Copper-free aluminum housing 45ft. sensitivity (latching alarm relays)
FS10-R45-SS	316 stainless steel housing 45ft. sensitivity (latching alarm relays)
FS10-RN30	Copper-free aluminum housing including ALERT / FIRE EARLY WARNING relay, 30ft. sensitivity (non-latching alert and alarm relays)
FS10-RN30-SS	316 stainless steel housing including ALERT / FIRE EARLY WARNING relay, 30ft. sensitivity (non‑latching alert and alarm relays)
FS10-RN45	Copper-free aluminum housing 45ft. sensitivity (non-latching alarm relays)
FS10-RN45-SS	316 Stainless steel housing 45ft. sensitivity (non-latching alarm relays)
Spare Parts - FS10 Stand Alone (Unitized) Electro-Optical Fire Detectors
FS10-R30-MOD	Replacement electronics module for Model FS10-R30 stand alone fire Detector (latching alert and alarm relays)
FS10-R30-EC-MOD	Replacement electronics module for Model FS10-R30 stand alone fire Detector (latching alert and alarm relays), Normally Energized with Normally Closed Contacts
FS10-R45-MOD	Replacement electronics module for Model FS10-R45 stand alone fire Detector (latching alarm relay)
FS10-RN30-MOD	Replacement electronics module for Model FS10-RN30 stand alone fire Detector (non-latching alert and alarm relays)
FS10-RN45-MOD	Replacement electronics module for Model FS10-RN45 stand alone fire Detector (non-latching alarm relay)
Card Controller with FS10 Electro-Optical Fire Detector
FS10R-GR-Kit	Stainless steel grill Kit for FS10-R and FS10-CS Detectors (Killark housing) Kit includes: (1) SS grill, (2) SS brackets, and (2) SS screws
RS-232 Cable	RS232 computer Cable for connection from FS7-130-SX, S7-2175, option-1 or option-2 controllers or interface box to PC
PSU-12	110/220 VAC, 50-60 HZ input /15 VDC output : universal Charger for interface box or DD Series, FT Series and TL Series test lamps
Accessories
SM4	Stainless steel swivel mount allows Detector to be pointed in any direction
FS-846-B	Test lamp Battery operated for testing FS10 fire Detectors up to 10ft.
EXPL-1	EXTENSION POLE FOR DPC-12 Extension Pole for placing and removing Disposable Protective Covers on FS10 Detectors
DPC-12	Disposable protective covers keeps powder or paint off the window lens of the FS10 fire Detector (12 per bag) (for use with FS10 only)
DASA1-P	Air shield for powder applications protects FS10 fire Detector window lens from powder build-up. Supplied with fitting for 1/4 in. tubing (can also be used with FS24X, FS20X, SS4, and SS2)
DASA6-N	Air shield for powder applications protects FS10 Fire Detector window lens from powder build-up. Supplied with fitting for 6 mm tubing